EasyManua.ls Logo

Panasonic KX-TGD564 - User Manual

Panasonic KX-TGD564
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operating Instructions
Link2Cell Cordless Telephone with
Digital Answering Machine
Model No.
KX-TGD560
KX-TG3760
KX-TGD562
KX-TGD563
KX-TG743SK
KX-TGD564
KX-TG744SK
Model shown is KX-TGD560.
Before initial use, see “Getting Started”
on page 11.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Consulte “Guía Rápida Española”, página 73.
For assistance, visit our Web site: http://shop.panasonic.com/support for
customers in the U.S.A.
Please register your product: http://shop.panasonic.com/support
This manual also supports the KX-TGD58xM2
Series Panasonic Telephone

Other manuals for Panasonic KX-TGD564

Questions and Answers

  • J
    Jean MartinSep 14, 2025
    Why can't I switch cellular calls from the Panasonic KX-TGD564 unit to the cellular phone?
    • K
      Kelly CrawfordSep 14, 2025
      Your cellular phone may not support this feature.
  • C
    Carla LawrenceAug 25, 2025
    What to do if my Panasonic Cordless Telephone does not work?
    • N
      Nicholas StricklandAug 25, 2025
      If your Panasonic Cordless Telephone isn't working, ensure the batteries are installed correctly. Fully charge the batteries. Check the connections. Unplug the base unit’s AC adaptor to reset the unit, then reconnect it and try again. Also, the handset may not be registered to the base unit; register the handset.
  • K
    Keith GreenAug 25, 2025
    Why can't I hear a dial tone on my Panasonic Cordless Telephone?
    • J
      Jon RamirezAug 26, 2025
      If you cannot hear a dial tone, the base unit’s AC adaptor or telephone line cord is not connected. Check the connections. Disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your phone service provider.
  • S
    susanadamsAug 26, 2025
    Why I cannot connect a cellular phone to the Panasonic KX-TGD564 Cordless Telephone?
    • J
      Jill BrownAug 27, 2025
      There might be several reasons why you can't connect a cellular phone to the base unit. First, confirm that your cellular phone is turned on and is within the base unit range. If the auto connection feature is not working, you can connect to the base unit manually. Ensure that the cellular phone is paired with the base unit. Disconnecting and reconnecting the device might also help. If your cellular phone is already registered on another Panasonic DECT phone, this function may not work properly, so it's recommended to remove the registration from both devices.
  • R
    richard18Sep 15, 2025
    Why can't I make a call using a landline on my Panasonic Cordless Telephone?
    • D
      Dana WangSep 15, 2025
      If you cannot make a call using a landline, the dialing mode may be set incorrectly. Change the setting.
  • G
    Gerald SuttonSep 23, 2025
    How to turn on the Panasonic KX-TGD564 Cordless Telephone handset?
    • A
      Alan CainSep 23, 2025
      Place the handset on the base unit or charger to turn on the handset.
  • C
    Charles MasonSep 7, 2025
    Why can't I make or answer cellular calls with my Panasonic Cordless Telephone handset?
    • J
      jschmidtSep 7, 2025
      Depending on the cellular phone’s compatibility, you may not be able to make or answer cellular calls even if the cellular phone is connected to the base unit. Make sure that the CELL indicator lights up and the cellular phone is connected to the base unit. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). The cellular phone may be being used separately from your system.
  • J
    Jaime Smith MDSep 8, 2025
    What to do if my Panasonic KX-TGD564 batteries still flashes after fully charged?
    • L
      Laura EvansSep 8, 2025
      If, after fully charging the batteries, the indicator still flashes, the display shows a specific symbol, or the operating time seems shorter, clean the battery ends and the charge contacts with a dry cloth and charge again. It may also be time to replace the batteries.
  • J
    jenniferbeltranSep 2, 2025
    Why does my Panasonic KX-TGD564 Cordless Telephone handset beep and/or flash?
    • T
      torresbrittanySep 2, 2025
      If your Panasonic Cordless Telephone handset is beeping and/or flashing, the battery charge is likely low. Fully charge the batteries.
  • L
    Lauren CastanedaAug 31, 2025
    Why does my Panasonic Cordless Telephone have noise and sound cutting in and out?
    • L
      Lauren BeanAug 31, 2025
      If you are experiencing noise or sound cutting in and out on your Panasonic Cordless Telephone, it could be due to electrical interference. Try repositioning the base unit and using the handset away from sources of interference. Also, move closer to the base unit. If you use a DSL/ADSL service, consider connecting a DSL/ADSL filter between the base unit and the telephone line jack.

Summary

Important Information

For your safety

Critical safety precautions to prevent injury and property damage during use.

Important safety instructions

Essential safety precautions to follow when using the product.

Getting Started

Setting up

Step-by-step guide for initial setup and connections of the base unit and charger.

Link to Cell

Link to cell feature

Overview of how to use cellular calls via Bluetooth.

Pairing a cellular phone

Step-by-step instructions for pairing a cellular phone to the base unit.

Making;Answering Calls

Making cellular calls

Instructions on how to make calls using paired cellular phones.

Making landline calls

Steps for making calls using the traditional landline.

Answering calls

How to receive incoming calls on the handset.

Intercom

Making calls between handsets within the same system.

Call Block

Phonebook

Phonebook

Information on adding, storing, and managing contacts.

Programming

Menu list

Explains how to navigate menus and use direct command codes.

Link to cell

Settings related to connecting and managing cellular phones via Bluetooth.

Call block

Settings for blocking specific numbers or types of calls.

Alarm

How to set alarms with text memos and snooze functions.

Silent mode

Setting periods when the handset will not ring.

Registering a unit

Procedure for adding new handsets or other compatible units.

Caller ID Service

Using Caller ID service

How to subscribe to and utilize Caller ID features.

Using Bluetooth Devices

Copying phonebook from a cellular phone (phonebook transfer)

Transferring contacts from a cell phone to the unit's phonebook.

Link to Cell app

Guide to installing and using the Link to Cell app for Android.

Alert settings for your DECT phone

Configuring alerts for cell phone notifications like SMS or calendar events.

Remote voice assist

Operating your phone's voice assistant via the handset.

Using a Bluetooth headset (optional)

Information on pairing and using a Bluetooth headset.

Pairing a Bluetooth headset to the base unit

Step-by-step process for connecting a Bluetooth headset.

Answering System for Landline

Answering system for landline

Overview of the answering system's capabilities.

Turning the answering system on;off

How to activate or deactivate the landline answering system.

Remote operation

Accessing the answering system remotely via phone.

Useful Information

Voicemail service for landline

Information about using phone company voicemail service.

Wall mounting

Instructions for securely mounting the base unit on a wall.

Error messages

Common error messages and their solutions.

Troubleshooting

General troubleshooting guide for common problems.

General use

Solutions for issues related to handset power and unit operation.

I cannot pair a cellular phone to the base unit.

Troubleshooting steps if cellular phone pairing fails.

I cannot connect a cellular phone to the base unit.

Solutions for issues with connecting a paired cellular phone.

Making;answering calls, intercom

Troubleshooting for call and intercom issues like noise or no ring.

Guía Rápida Española

Preguntas frecuentes

Common questions and solutions in Spanish.

Appendix

Limited Warranty (ONLY FOR U.S.A.)

Details of the product's limited warranty coverage for US customers.

Panasonic Products Limited Warranty

The official warranty statement from Panasonic.

Limited Warranty Limits and Exclusions

Specific conditions and items not covered by the product's warranty.

Panasonic KX-TGD564 Specifications

General IconGeneral
BrandPanasonic
ModelKX-TGD564
TypeCordless Telephone
Frequency1.9 GHz
DECT 6.0Yes
Number of Handsets1
Answering SystemYes
Digital Answering System Recording TimeUp to 18 minutes
Caller IDYes
Call BlockYes
Keypad on BaseYes
SpeakerphoneYes
Backlit KeypadYes
Battery TypeNi-MH
Talk TimeUp to 10 hours
Call WaitingYes
IntercomYes
Power SourceAC Adapter
ColorBlack
Display Size1.8 inches
Expandable HandsetsYes
DisplayLCD
RangeUp to 1000 feet
Phonebook Capacity100 names and numbers

Related product manuals