Panasonic KX-TGD512 - User Manual

Panasonic KX-TGD512

64 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Operating Instructions

Cordless Telephone

Model No.

KX-TGD510

KX-TGD512

KX-TGD513

Cordless Telephone with

Digital Answering Machine

Model shown is KX-TGD510.

Model No.

KX-TGD530

KX-TGD532

KX-TGD533

KX-TGD534

KX-TGD535

Before initial use, see “Getting Started”

on page 10.

Thank you for purchasing a Panasonic product.

Please read these operating instructions before using the unit and save them for

future reference.

Consulte “Guía Rápida Española”, página 52.

For assistance, visit our Web site: http://shop.panasonic.com/support for

customers in the U.S.A.

Please register your product: http://shop.panasonic.com/support

TGD51x_OI(en)_1007_ver002.pdf 1 2016/10/07 10:05:45

Table of Contents

Questions and Answers

E
erinkellySep 23, 2025
What to do if liquid gets into my Panasonic KX-TGD512?
- N
  Nicole MarshallSep 23, 2025
  If liquid or moisture has entered your Panasonic Cordless Telephone handset or base unit, disconnect the AC adapter and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. Reconnect the AC adapter and telephone line cord. Insert the batteries and charge fully before use. If the issue persists, contact an authorized service center.
C
Christine GarnerAug 25, 2025
Why I cannot hear a dial tone on my Panasonic KX-TGD512?
- K
  Kenneth SimsAug 25, 2025
  If you cannot hear a dial tone on your Panasonic Cordless Telephone, it might be because the base unit’s AC adaptor or telephone line cord is not connected properly. Check the connections to ensure they are secure.
R
robertoflynnAug 25, 2025
What to do if Panasonic KX-TGD512 Cordless Telephone handset does not ring?
- J
  jennifer18Aug 26, 2025
  If the handset of your Panasonic Cordless Telephone does not ring, ensure that the ringer volume is not turned off. Adjust the ringer volume as needed. Also, check if silent mode is turned on and turn it off if it is. Additionally, pressing and holding 0 can toggle the ringer on or off, so ensure it is turned on this way as well.
K
Kara RileyAug 27, 2025
Why is my Panasonic KX-TGD512 battery not charging properly?
- S
  Steven MorrisonAug 27, 2025
  If you fully charged the batteries of your Panasonic Cordless Telephone, but the battery icon still flashes, displays a low battery symbol, or the operating time seems shorter, clean the battery ends and the charge contacts with a dry cloth and charge again. It may also be time to replace the batteries.
J
James GlennAug 27, 2025
What to do if my Panasonic KX-TGD512 Cordless Telephone does not work?
- S
  Sara Nguyen DVMAug 27, 2025
  If your Panasonic Cordless Telephone isn't working, there are several things to try: * Ensure the batteries are correctly installed. * Fully charge the batteries. * Check all connections. * Unplug the base unit’s AC adapter to reset the unit. * Register the handset.
N
Nancy SaundersSep 14, 2025
What to do if liquid entered my Panasonic KX-TGD512 Cordless Telephone?
- A
  andradebrendanSep 14, 2025
  If liquid or other moisture has entered your Panasonic Cordless Telephone handset or base unit, disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and let it dry for at least 3 days. After it is completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use.
C
carrieturnerSep 12, 2025
Why is caller information late on Panasonic KX-TGD512?
- H
  Hannah SolisSep 12, 2025
  If caller information is displayed or announced late on your Panasonic Cordless Telephone, it may be due to your phone service provider. The unit may display or announce the caller’s information at the 2nd ring or later, depending on the provider.
H
Heather CampbellSep 13, 2025
Why is caller information not announced on my Panasonic Cordless Telephone?
- K
  Keith SmithSep 13, 2025
  If caller information is not announced on your Panasonic Cordless Telephone, ensure that the handset or base unit’s ringer volume is not turned off by adjusting it. Also, confirm that the Talking Caller ID feature is turned on. Finally, check that the number of rings for the answering system is not set to “2 rings” or “Toll saver”; select a different setting if it is.
C
Christopher HughesSep 5, 2025
How to fix Panasonic KX-TGD512 Cordless Telephone when I cannot make a call?
- S
  Stephanie KennedySep 5, 2025
  If you cannot make a call on your Panasonic Cordless Telephone, try changing the dialing mode setting.
A
amy00Sep 2, 2025
Why does my Panasonic KX-TGD512 have static and cut out?
- K
  Kristina GreeneSep 2, 2025
  If you're experiencing noise or sound cutting in and out on your Panasonic Cordless Telephone: * The handset or base unit might be in an area with high electrical interference. Try re-positioning the base unit and using the handset away from sources of interference. * Move closer to the base unit. * You may need to contact your DSL/ADSL provider for details.

Panasonic KX-TGD512 Specifications

General

Brand	Panasonic
Model	KX-TGD512
Category	Cordless Telephone
Language	English

Related product manuals

Preview: Panasonic KX-TGD510

Panasonic KX-TGD510

Preview: Panasonic KX-TGD560

Panasonic KX-TGD560

Preview: Panasonic KX-TGD562

Panasonic KX-TGD562

Preview: Panasonic KX-TGD563

Panasonic KX-TGD563

Panasonic KX-TGD564

Panasonic KX-TGD532

Panasonic KX-TGD533

Panasonic KX-TGD530

Preview: Panasonic KX-TGD58 M2 Series

Panasonic KX-TGD58 M2 Series

Panasonic KX-TGD223

Preview: Panasonic KX-TGD890

Panasonic KX-TGD890

Preview: Panasonic KX-TGD390C

Panasonic KX-TGD390C