13
USER GUIDE
Panasonic DECT KX-TGP600 User Guide
[In standby mode]
1.
during a conversation.
2.
3. [▲] / [▼]: Select a desired handset/desk phone. →
4. Wait for the paged party to answer.
5. K X-TPA60:
*1
KX-TPA65:
On-hook*1
*1 When connected to a base unit other than the KX-TGP600, the operation is as follows.
KX-TPA60:
/[XFER/CLR]
KX-TPA65:
/[TRANSFER]
Holding a Call
You can put a call on hold by holding the call at your extension.
Holding
To hold the current call
1. 1. KX-TPA60:
/[HOLD/MSG]
KX-TPA65:
/[HOLD]
Note: If you select a LINE key other than the one for the current call, the call is put on hold or is disconnected depending on the Automatic Call
Hold settings. For details, contact your phone system dealer/service provider.
To retrieve a call on hold
1. KX-TPA60:
/[HOLD/MSG]
KX-TPA65:
/[HOLD]
To retrieve a call on hold at your line (when connected to the KX-TGP600 only)
1.
/[LINE]
2. Press the dial key corresponding to the slowly ashing green LINE indicator, or press [▲] or [▼] to select a slowly ashing green LINE
indicator. →
To Next Page
Loading...
