21
USER GUIDE
Panasonic DECT KX-TGP600 User Guide
Note
• Steps 8 and 9 can be omitted if you do not want to assign a category.
• Steps 10 and 11 can be omitted if you do not want to assign a default number. (The rst number entered for an entry will automatically be
assigned as the default number.)
• The valid digits are “0” through 9”, “g”, “#”, “+”, “P”.
• If an item with the same name and number exists, the new information added will be merged with the existing item.
• When connected to a base unit other than the KX-TGP600, a menu to select the save destination of the phonebook is displayed between
steps 3 and 4.
Editing a Stored Item in the Handset Phonebook
Editing a Stored Item [In standby mode]
1.
2. [▲]/[▼]:“Phonebook” → OK *1
3. Enter the name or the rst character(s) of the desired name. →
4. [▲]/[▼]: Select the desired item. →
5. [▲]/[▼]: “Edit” →
6. [▲]/[▼]: Select the desired name, phone number, category or default telephone number. →
7. Edit the data as necessary. →
8. Repeat step 6 to 7 and edit the items you want to change.
9.
*1 If only Handset Phonebook is permitted, this step is skipped.
Note: To change a character or digit.
1. Press [◄] or [►] to highlight a character or digit.
2. Delete the character or digit. KX-TPA60:
/[XFER/CLR]
KX-TPA65:
/[TRANSFER]
3. Enter the new character or digit.
• To clear an entire line. KX-TPA60:
Press and hold
/[XFER/CLR] for more than 1 second. KX-TPA65:
Press and hold
/[TRANSFER] for more than 1 second.
• To move the cursor to the left or right, press [F] or [E], respectively.
To Next Page
Loading...
