Panasonic KX-TGP600 - Easy Dialing; Making a Call Using the Redial List; Hot Key Dialing; Using the Incoming;Outgoing Call Log

5
USER GUIDE
Panasonic DECT KX-TGP600 User Guide
Easy Dialing
Making a Call Using the Redial List
The last phone number dialed is stored in the redial list (each 32 digits max.).
[In standby mode]
1.
/[FUNC]/[FUNCTION] →1
Note: If the Redial key is not assigned to dial key 1, press the actual assigned dial key.
When using a KX-TPA65,
[REDIAL] can also be used.
Hot Key Dialing
You can assign a phone number to each number key and then access the desired phone number by simply pressing and holding the assigned
number key.
1. Press and hold the dialing key (0–9) assigned as a Hot Key for more than 1 second.
2. KX-TPA60:
KX-TPA65:
O-hook
Note: While the Hot Key’s information is displayed, you can press [
] or [ ] to select another Hot Key number.
If Hot Key dialing is set to “Auto”, a Hot Key number can also be dialed by pressing and holding the assigned dialing key for a specied
number of seconds.
Using the Incoming/Outgoing Call Log
Using the Incoming Call Log [When the Incoming Call Log is displayed]
1. [▲] / [▼]: Select an incoming call log.
2. Make a call KX-TPA60:
KX-TPA65:
O-hook
3. End the call KX-TPA60:
KX-TPA65:
On-hook