Panasonic KX-TGP600G - Editing a Stored Item in the Handset Phonebook

• Steps 10 and 11 can be omitted if you do not want to assign a default number. (The
first number entered for an entry will automatically be assigned as the default
number.)
• The valid digits are "0" through "9", " ", " ", " ", "P".
To enter " " or "P", see 3 Making Calls, page 85.
• If an item with the same name and number exists, the new information added will be
merged with the existing item.
• To enter characters, see 2.11 Entering Characters, page 82.
• When connected to a base unit other than the KX-TGP600, a menu to select the
save destination of the phonebook is displayed between steps 3 and 4.
7.2.3 Editing a Stored Item in the Handset Phonebook
Editing a Stored Item
[In standby mode]
1.
2. [ ]/[ ]: "Phonebook"
OK
*1
3. Enter the name or the first character(s) of the desired name.
OK
4. [ ]/[ ]: Select the desired item. /
MENU
/
5. [ ]/[ ]: "Edit"
OK
6. [ ]/[ ]: Select the desired name, phone number, category or default telephone
number.
OK
7. Edit the data as necessary.
OK
8. Repeat step 6 to 7 and edit the items you want to change.
9.
SAVE
/
Save
*1
If only Handset Phonebook is permitted, this step is skipped.
Note
• To change a character or digit.
1. Press [ ] or [ ] to highlight a character or digit.
2. Delete the character or digit.
KX-TPA60:
/ /[XFER/CLR]
KX-TPA65:
/ /[TRANSFER/CLEAR]
KX-TPA68:
7.2.3 Editing a Stored Item in the Handset Phonebook
110