Panasonic KX-TGP600G - Setting the Password

For details about the setting, see System Settings, page 161.
*1
The administrator password may be required for this setting. Contact your
administrator for further information. For available characters, see “10.1.2 Character
Table for Administrator Password”, page 146.
2.8 Setting the Password
The handset/desk phone password is not set by default. You must register a handset/
desk phone password (4 digits) before use. You cannot use the following features
without setting a password:
• Phonebook lock (See 7.2.6 Locking the Handset Phonebook, page 114).
• "Manual&Password" or "Auto&Password" for "Key Lock Type" (See Key Option, page
151).
• Reset Handset (See Other Option, page 158).
Note
• To avoid unauthorized access to this product:
–Set a password that is random and cannot be easily guessed.
–Change the password regularly.
• Make a note of the password so that you will not forget it.
To set
[In standby mode]
1. /
MENU
/
2. KX-TPA60/KX-TPA65:
[ ]/[ ]/[ ]/[ ]:
OK
KX-TPA68:
[ ]/[ ]: "Setting Handset"
OK
3. [ ]/[ ]: "Other Option"
OK
4. [ ]/[ ]: "Change Password"
*1
OK
5. Enter a new password (4 digits [0–9]).
6. Verify the password by entering it again as in step 5.
*1
The administrator password may be required for this setting. Contact your
administrator for further information. For available characters, see “10.1.2 Character
Table for Administrator Password”, page 146.
2.8 Setting the Password
80