2 Before Operating the Telephones
2.1 Before Operating the Telephones
2.1.1 System Overview
<When the base unit is a KX-TGP600>
The KX-TGP600 is a SIP Cordless Phone, which consists of a base unit, a cordless
handset and a wireless desk phone, and has the following features. The handset is the
same as the KX-TPA60 and the desk phone is the same as the KX-TPA65/KX-TPA68.
• Expandable to cordless handsets/desk phones [KX-TPA60, KX-TPA65, KX-TPA68
*1
,
KX-UDT
*2
series (except for KX-UDT111), KX-TPA70
*3
, KX-TPA73
*3
].
Up to 8 phones in total.
• Up to 8 simultaneous calls (Narrowband mode), or up to 4 simultaneous calls
(Wideband mode)
• High quality sound using noise reduction and error correction technology
• You can increase the signal range of the base unit by using a KX-A406.
Note
• If you will connect a KX-UDT
*2
series handset (except for KX-UDT111) to the
KX-TGP600, first download the firmware from the following web site and update the
KX-TGP600. Then, when you register a KX-UDT series handset to the KX-TGP600,
the handset will be updated automatically.
However, there are some differences in the functionality between the
KX-TPA60/KX-TPA65/KX-TPA68 units and the KX-UDT series handsets. For
details, refer to the following web site.
https://panasonic.net/cns/pcc/support/sipphone/
"Download" → "KX-TGP600 series"
*1
If you connect a KX-TPA68 to a KX-TGP600 with a Software File Version that does not
support the KX-TPA68, an error message will be displayed on the KX-TPA68. For
details, see 10.1.9 Error Messages, page 173.
*2
For KX-UDT series, Software File Version 06.000 or later.
KX-UDT series are not available for KX-TGP600LA, KX-TGP600LC, KX-TGP600AG or
KX-TGP600BR.
*3
For KX-TPA70 or KX-TPA73, Software File Version 13.000 or later.
For more information, refer to the corresponding manuals.
https://panasonic.net/cns/pcc/support/sipphone/
2 Before Operating the Telephones
20
To Next Page
Loading...
