Panasonic KX-TGP600G - Updating the Software

To Lock the Handset when the Unit is Wall Mounted
KX-TPA65/KX-TPA68 (Desk Phone)
1. Remove the handset hook from the slot.
2. Turn it up-side-down.
3. Slide the handset hook back into the slot until it locks.
4. Handset is safely hooked when it is in the cradle.
Example: KX-TPA65
9.3 Updating the Software
When the base unit requests to update the handset/desk phone software, the handsets/
desk phones registered to the base unit will start their software update automatically.
9.3.1 Updating the Handset/Desk Phone Software
The following handsets/desk phones can update their own software, which can be
downloaded through the KX-TGP600 automatically:
–KX-TPA60
–KX-TPA65/KX-TPA68
–KX-UDT series (except for KX-UDT111)
*1
After the base unit requests to start downloading the handset/desk phone software, you
cannot enter any keys.
The update is performed automatically. Follow the instructions on the LCD and wait until
the update finishes.
*1
KX-UDT series are not available for KX-TGP600LA, KX-TGP600LC,
KX-TGP600AG or KX-TGP600BR.
Note
• If you failed in the update, contact your administrator.
9.3 Updating the Software
137