Panasonic KX-TGP600G - Deregistering a Handset;Desk Phone; Registering;Deregistering the Handset;Desk Phone to a Base Unit Other than the KX-TGP600

Follow the procedure from step 2 above with the handset/desk phone you want to
add.
*1
The administrator password may be required for this setting. Contact your
administrator for further information. For available characters, see 10.1.2 Character
Table for Administrator Password, page 146.
9.4.2 Deregistering a Handset/Desk Phone
A handset/desk phone can cancel its own registration (or the registration of another
handset/desk phone) that is stored to the base unit. This allows the handset/desk phone
to end its wireless connection with the system.
1. Handset/desk phone:
[In standby mode]
a.
/
MENU
/
b. KX-TPA60/KX-TPA65:
[
]/[ ]/[ ]/[ ]:
OK
KX-TPA68:
[ ]/[ ]: "System Settings"
OK
c. [ ]/[ ]: "System Settings"
*1
OK
d. [ ]/[ ]: "Cancel Register"
OK
e. Select a handset/desk phone.
OK
*1
The administrator password may be required for this setting. Contact your
administrator for further information. For available characters, see 10.1.2 Character
Table for Administrator Password, page 146.
9.4.3 Registering/Deregistering the Handset/Desk Phone to a Base Unit
Other than the KX-TGP600
Registering the handset/desk phone
The base unit operations/settings should be performed according to the base unit’s
instructions.
Handset/desk phone registration using the base unit
1. Base unit:
Enter handset/desk phone registration mode.
2. Handset/desk phone:
Using an unregistered handset/desk phone, press
OK
and follow the on-screen
instructions until registration is complete.
9.4.2 Deregistering a Handset/Desk Phone
140