Status
Meaning
Color
Light
pattern
Off — • The base unit power is off.
• The Ethernet cable is not connected properly.
Connect it.
• Your network devices (hub, router, etc.) are
turned off. Check the LEDs for the link status of
the devices.
Note
• The indicator flashing patterns are as follows:
–Slow Flashing: 60 times per minute
–Quick Flashing: 240 times per minute
Handset locator button
You can locate a misplaced handset/desk phone by paging it.
If you press the button again, or after 60 seconds have passed, the page to the
handset/desk phone will be stopped.
You can also register the handset/desk phone to the base unit by pressing and holding
the button for about 3 seconds.
For details, see Handset/desk phone registration using the base unit, page 138.
2.3.1 Base Unit (KX-TGP600)
30
To Next Page
Loading...
