line number indicates the status of the line or the status of the function assigned to the
key. The icon displayed on the next line shows the status of each line. Lines that are
available can be changed using Multiline Setting. See System Settings, page 161.
However, when connecting to a base unit other than the KX-TGP600, you can only seize
a line using this key. You cannot check the status of the lines.
[KX-TPA60/KX-TPA65]
• When connected to a KX-TGP600
[Example]
• To select a key, press [ ] or [ ] to select the desired key.
• If you press a dial key when displaying the line status, only the limited line is displayed.
• The line name can be changed. Contact your administrator for further information.
Status Indication
*1
Status
Meaning
Color
Light
pattern
Green On "In Use"
• You are on a call.
Slow
Flashing
"Line On Hold"
• A call is on hold.
Quick
Flashing
"Incoming Call/Recall"
• A call (including Hold Recall) is being received.
Red On "In Use"
• A shared line is in use or on private hold at another
unit.
Slow
Flashing
"Line On Hold"
• A shared line is on hold at another unit.
Quick
Flashing
"Incoming Call"
• A call to another line is being received.
2.4.5 LINE Key
60
To Next Page
Loading...
