To Next PageTo Next Page
What does it mean when the LED blinks and Handsets beeps rapidly?
If, while charging the battery, the LED indicator blinks rapidly and the handset beeps rapidly, the battery is not charging correctly due to an electrical failure. Unplug the AC adaptor from the AC outlet, remove the battery from the handset. Also, a wrong type of battery such as Alkaline or Manganese was inserted. Use only the rechargeable Ni-MH batteries.
What to do if my Panasonic Handset does not work?
If your Panasonic handset isn't working, it might be due to a drained battery. Charge the battery fully. Alternatively, the power might be off. In that case, turn it on or try re-inserting the battery and then setting the handset on the charger.
Why is it hard to have a conversation on Panasonic Handsets in Hands-free mode?
If it's difficult to have a conversation in Hands-free mode on your Panasonic handset, the microphone might be facing the wrong direction or is obstructed during the conversation. Ensure the front of the handset faces you, and the microphone is not covered.
Why is the charge indicator flashing red on my Panasonic Handsets?
If the charge indicator flashes red rapidly on your Panasonic handset, the charger is not connected properly. Make sure the battery is inserted properly and set the handset in the charger correctly.
How to fix Panasonic Handsets headset that doesn't work?
If the headset on your Panasonic handset isn't working, make sure the headset tone setting is set to "On". Also, ensure the headset jack is connected properly.
Why does my Panasonic Handsets say "No Service"?
If your Panasonic handset displays "No Service" and you hear beep tones, it could be that the handset is out of range. Try moving closer to the base unit or try again later.
Why I can't dial on my Panasonic Handsets?
If you cannot dial on your Panasonic handset, key lock mode might be on. To cancel the mode, press and hold the key lock button for about 2 seconds.
Why is my headset not working with my Panasonic IP Phone?
If your headset isn't working with your Panasonic IP Phone, make sure the headset tone setting is set to "On". Also, verify that the headset jack is properly connected.
Why does my Panasonic Handsets beep after charging?
If your Panasonic handset beeps and indicates it needs to be charged even after charging for 6 hours, the battery charge contacts may be dirty. Clean the battery charge contacts without damaging them and charge once more. It may also be time to replace the batteries with new ones.
What to do if Panasonic Handsets stops working during operation?
If your Panasonic handset stops working during operation, an unknown error may have occurred. Try turning the handset off and then back on. Alternatively, re-insert the battery and try again.
General| Speakerphone | - |
|---|---|
| Phonebook capacity | 500 entries |
| Brand compatibility | Panasonic |
| Headset connectivity | Yes |
| Display type | LCD |
| Product color | Black |
| Display diagonal | 1.8 \ |
| Harmonized System (HS) code | 85177900 |
Weight and Dimensions| Depth | 25.5 mm |
|---|---|
| Width | 47.8 mm |
| Height | 153.2 mm |
| Weight | 117 g |
Describes the manual's content and lists related documentation and font info.
Section for recording product information for future reference.
Guidelines for protecting data and preventing unauthorized access.
Information for users in European, UK, Australian, NZ, US, Canadian, and Argentine regions.
Tips for best performance, operating environment, care, and battery info.
Covers making calls by dialing, redialing, hot keys, and hot lines.
Instructions for making group voice announcements to multiple units.
Handling incoming calls, viewing caller ID, and answering methods.
Using hands-free, intercom, silent modes, and noise reduction features.
Procedures for transferring calls, placing them on hold, and setting up conferences.
Using mute, handling call waiting, and activating the off-hook monitor feature.
Configuring call forwarding rules and activating Do Not Disturb mode.
Instructions for accessing and listening to voicemail messages.
Overview of phonebook types and detailed management of handset phonebook.
Procedures for managing phonebook entries on base units and remotely.
Customizing display, hot keys, alarms, function keys, and default settings.
Blocking anonymous calls, call barring, anonymous calls, and web interface settings.
Attaching stands, connecting power, batteries, belt clip, and wall mounting.
Updating device software and pairing/unpairing with base units.
Character mode tables and detailed menu layouts for various settings.
Technical specs, RF info, troubleshooting common issues, and error messages.
Records of software updates and changes made to the product.
