4.5 KX-TD Series PBX Programming for DPT Integration
124 Installation Manual
2. Go to the Main Menu. Choose "System Data Programming" (BATCH [1] or INTERACTIVE
[2]).
3. Choose "System" from the System Data Programming Main Menu.
4. Choose "Voice Mail Integration" from the System Menu.
5. First, enter the port numbers that will be connected to the VPS. If desired, change the default
extension numbers of the Voice Mail ports.
6. Step 6 should only be completed if the VPS is going to answer all incoming trunk calls
directly.
Return to the System Data Programming Main Menu. Select "Line" and then select "CO Line
Setting 1" or "CO Line Setting 2". Program all lines DIL to the first extension of the Voice Mail
hunt group.
7. Continue from step 5 of 4.5.1 KX-TD Series PBX Programming via the Manager's Extension.
To Next Page
Loading...
