2.7 Installing Optional Cards—KX-TVM50
50 Installation Manual
2.7.2 2-Port Digital Expansion Card (KX-TVM503)
Each KX-TVM503 adds 2 ports to the VPS which can be used for DPT Integration.
KX-TVM503 cards can be installed in slots 2 and 3 of the VPS.
Included Items
Screws × 2
Installation
1. Position the front of the card so that the jacks fit in the open slot. Holding the card firmly in place,
lower the other end of the card so that the card's hole fits over the extension bolt.
CAUTION
When installing optional cards, do not put pressure on the main board. Doing so may result in
damage to the VPS.
Integration Type
Basic Configuration
Maximum Configuration
KX-TVM503 x 2
No. of Jacks No. of Ports No. of Jacks No. of Ports
DPT Integration 1 2 3 (1 per card) 6
2
1
Extension Bolt
To Next Page
Loading...
