Panasonic KX-TVM200 - 4.8 Completing the PBX-VPS Connection

4.8 Completing the PBX-VPS Connection
134 Installation Manual
4.8 Completing the PBX-VPS Connection
Once you have finished installing all optional cards, connecting all telephones to the PBX, and
configuring the PBX for APT/DPT Integration, proceed with the following steps to complete and test
the PBX-VPS connection.
1. Start KX-TVM/NCV Maintenance Console (see 3.2 KX-TVM/NCV Maintenance Console
Installation).
2. Using KX-TVM/NCV Maintenance Console, initialise the PBX (see 7.1 Initialising the VPS).
3. Start the Quick Setup utility and proceed with Quick Setup (see 6.1.2 Quick Setup).
4. Click "Utility" on the menu bar.
5. Select "Line Status".
6. Make sure each line connecting the PBX and VPS is shown as being "Ready".