4.9 KX-TA, KX-TD, and KX-TE Series PBX Feature Programming for APT/DPT Integration
140 Installation Manual
1. Go to "4-2 Extension Line" screen.
2. Select the "Card No." and "Port No." which you are going to program.
3. In "LCS Settings":
a) To set LCS Password, Enter a 3-digit number (using "0-9") in "LCS Password".
Note
• To cancel the password, erase the 3-digit number
b) To assign LCS Recording Mode, Set "Recording Mode" to "Keep Rec" or "Stop Rec".
c) To assign LCS Private/Hands-free Mode, Set "Operation Mode" to "Private" or "Hands-
free".
d) To activate the LCS status, Set "Status" to "Active".
Note
• To utilise the Live Call Screening features, it is necessary to first assign the LCS
Password and LCS Button (see 4.9.12 Button Assignment via PC Programming), and
then activate the LCS status.
4. Click "Apply".
5. Repeat steps 2 to 4 for each extension.
To Next Page
Loading...
