2.3 Names and Locations
40 Installation Manual
LAN Port (Optional for KX-TVM50)
Used to access the VPS over an Ethernet network.
USB Port
Used to access the VPS via USB.
Earth Terminal
Must be connected to an earth source with less than 1 resistance.
DC IN
Used to supply power to the VPS from the AC Adaptor.
Power Switch
Starts the system and begins the self-test.
SAFETY PRECAUTION: When making any connections or removing the cover, be sure the
power switch is turned off.
Factory Installed Flash Memory Card (KX-TVM50 only)
Stores all system programming and system prompts, and allows up to 4 hours of message recording
time.
Hard Disk Drive (KX-TVM200/KX-NCV200 only)
Stores all system programming and system prompts, and allows up to 1000 hours of message
recording time.
Note
• The actual hard disk drive mounted on your VPS may look different from the ones illustrated
in this manual.
To Next Page
Loading...
