2.15 Wall Mounting
78 Installation Manual
Mounting on Concrete or Mortar Wall
CAUTION
When driving the mounting screws into the wall, be careful to avoid touching any metalwork
(metal/wire laths, etc.), conduits, or electrical cables buried in the wall.
1. Place the AC adaptor wall mounting template (found later in this section) on the wall to mark the
locations where the 2 screws need to be placed.
2. Install 2 anchor plugs (user-supplied) in the wall.
3. Install the screws (included) in the wall.
KX-TVM50 KX-TVM200/KX-NCV200
83 mm 110 mm
Hammer
29 mm
Anchor Plug
6.4 mm
Drive the screw
to this position.
To Next Page
Loading...
