3.3 Starting KX-TVM/NCV Maintenance Console
90 Installation Manual
Note
• To connect to the VPS via LAN, first connect to the VPS via USB and set the appropriate
LAN settings. Refer to 1.8.12 Utility—LAN Settings in the Programming Manual.
• To connect to the VPS via modem, refer to 1.4.3 Connect—Modem (optional) in the
Programming Manual.
• If programming the VPS for the first time, the Quick Setup utility can help you program
essential settings quickly and easily. See 6.1.2 Quick Setup for more information.
• KX-TVM/NCV Maintenance Console can be used when offline (not connected to the VPS)
or when connected. When offline, you can set and save the settings you have made and
upload them to the VPS later when connected.
• Software features, design, and system requirements are subject to change.
To Next Page
Loading...
