1.2 Installing and Starting KX-TVM Maintenance Console
10 Programming Guide
1.2.2 Starting KX-TVM Maintenance Console
Note
The screenshots shown here are for reference only, and may differ from the screens displayed
on your PC.
1. Click the KX-TVM Maintenance Console shortcut
icon.
2. Enter a valid programmer code, then click OK.
3. Click Connect → USB from the menu bar, or click
Connect on the shortcut bar, select USB in the
Connection Mode dialogue box and click Next.
Note
To connect to the VPS via USB, the KX-TVM
USB driver must be installed on the PC, as
explained above in "1.2.1 Installing KX-TVM
Maintenance Console".
4. Enter the password and click Next.
To Next Page
Loading...
