1.2 Installing and Starting KX-TVM Maintenance Console
Programming Guide 9
1.2 Installing and Starting KX-TVM Maintenance
Console
1.2.1 Installing KX-TVM Maintenance Console
System programming, diagnosis, and data upload/download can be performed with a PC using the
KX-TVM Maintenance Console software.
This section briefly describes how to install and start KX-TVM Maintenance Console on a PC that is
connected to the VPS via USB.
System Requirements
Operating System
• Microsoft Windows 98 SE, Windows Me, Windows 2000, or Windows XP
Hardware
• CPU: 133 MHz Intel Pentium or faster
• RAM: At least 64 MB of available RAM (128 MB recommended)
• Hard disk space: At least 100 MB of space for the installation, and approximately 2 MB of
additional space for user files.
Software Installation
Notes
• To install or uninstall the software on a PC running Windows 2000 Professional or Windows
XP Professional, you must be logged in as a user which is in either the "Administrators" or
"Power Users" group.
• When the VPS is first connected to the PC via USB, a wizard should appear and ask you to
select the appropriate USB driver. Browse for and select the KX-TVM USB driver, which is
copied to the local drive during installation.
1. Copy the KX-TVM Maintenance Console setup file to a local drive on the
PC. (Its icon is shown here, on the left.)
2. Double-click the setup file to run the installer.
3. Follow the on-screen instructions provided by the installation wizard.
4. Click Finish.
5. Click OK.
To Next Page
Loading...
