2.5 System Parameters
Programming Guide 109
Feature Guide References
2.3.12 Company Greeting
Evening Hours Start Time
Specifies the starting time of the evening greeting.
Value Range
HH:MM (HH: Hour, MM: Minute)
Feature Guide References
2.3.12 Company Greeting
Daylight Saving Time
Specifies whether to use daylight saving time. If "Enter Time Frame" is selected, both the starting date
and ending date must be set. The same date cannot be used for both settings. The clock adjusts itself
from 2 am to 3 am on the starting date, and adjusts itself from 2 am to 1 am on the ending date.
WARNING
If the VPS clock is synchronised with the PBX clock (see "2.1.5 Time
Synchronisation (DPT Integration Only)" in the Feature Guide), the daylight
saving time setting of the VPS is not used. Adjust the PBX for daylight saving time
as necessary.
Note
• The VPS changes to and from DST at 2:00 AM. In most of the United States, DST begins
at 2:00 AM on the first Sunday in April and ends at 2:00 AM on the last Sunday in October.
Value Range
None
Enter Time Frame (Start Date, End Date): YY/MM/DD (YY: Year, MM: Month, DD: Day)
Feature Guide References
2.3.16 Daylight Saving Time Assignment
Prompt Setting
This setting is required when Multilingual Service is enabled.
Primary Language
Specifies the default language to be used when another language is not selected in the Multilingual
Selection Menu.
To Next Page
Loading...
