Panasonic KX-TVM50 - Page 111

2.5 System Parameters
Programming Guide 111
Selection Menu Repeat Cycle
Specifies the number of times the VPS will play the Multilingual Selection Menu.
Value Range
1–3 times
Feature Guide References
2.3.31 Multilingual Service
Delay Time After Connected Received for Incoming
Specifies the length of time (in seconds) that the VPS waits after the line is connected for incoming
calls before playing the prompt.
Value Range
0 s–10 s
Feature Guide References
2.3.42 System Prompts
Delay Time After Connected Received for Outgoing
Specifies the length of time (in seconds) that the VPS waits after the line is connected for outgoing
calls before playing the prompt.
Value Range
0 s–10 s
Feature Guide References
2.3.42 System Prompts
System Guidance
Specifies the parameters which vary depending on the language assigned as the System Guidance
language.
Follow the steps below to edit System Guidance.
1. Click Click to edit….
2. Select the desired Guidance No. (1–10).
3. Edit each parameter.
4. Click OK.