2.2 Class of Service
Programming Guide 61
Value Range
LIFO: Messages are retrieved starting with the most recent (Last In First Out).
FIFO: Messages are retrieved starting with the oldest (First In First Out).
Intercom Paging Group
Specifies the Intercom Paging group number available to the subscriber.
Note
• The Intercom Paging feature is only available when the VPS is connected to a Panasonic
KX-T series PBX using APT/DPT Integration.
• "Intercom paging Parameters" can be edited by clicking Edit System Parameters/
Parameters/Intercom Paging Parameters.
Value Range
1–32, All
Feature Guide References
2.3.23 Intercom Paging (APT/DPT Integration Only)
Prompt Mode
Specifies the language used for system prompts played for the subscriber during Subscriber Service.
If "Primary" is enabled, the default language which is selected from all installed languages will be
used.
Note
• If a certain prompt is not recorded in the language selected by the subscriber, the English
version of that prompt will be used.
Value Range
Primary, Selection from all installed languages (KX-TVM50: 3 languages, KX-TVM200: 10
languages)
Feature Guide References
2.3.31 Multilingual Service
2.3.42 System Prompts
Number of CIDs for Caller Name Announcement
Specifies the maximum number of Caller IDs which subscribers can assign for the Personal Caller
Name Announcement.
Value Range
None, 1–30
To Next Page
Loading...
