2.4 Service Settings
94 Programming Guide
Operation: Tr to Mbx, Tr to Ext, Operator, Tr to Out, Exit, Prev Menu, CS, VM Serv, Tr Serv, Subscriber
Serv, Dial by Name, Repeat Menu, Main Menu, Fax Tr, None (see "Keypad Assignment 0–9, *, #".)
Feature Guide References
2.3.15 Custom Service
Time Control
This service allows you to assign a different operation for up to 5 blocks of time during the day. The
caller makes no selection and no menu is announced.
Description
The information typed in this field is for reference only.
Value Range
Max. 32 characters
Feature Guide References
2.3.15 Custom Service
Time Period 1–5, Outside
<Period 1–5>
Specifies the name of time period for reference, start and end time, and an operation.
<Outside>
Allows you to specify an operation that is enabled for all other times not included in the set time
periods.
Value Range
<Period 1–5>
Name: Max. 16 characters
Time: HH:MM:SS (HH: Hour, MM: Minute, SS: Second)
Operation: Tr to Mbx, Tr to Ext, Operator, Tr to Out, Exit, Prev Menu, CS, VM Serv, Tr Serv, Subscriber
Serv, Dial by Name, Repeat Menu, Main Menu, Fax Tr, None (see "Keypad Assignment 0–9, *, #".)
<Outside>
Operation: Tr to Mbx, Tr to Ext, Operator, Tr to Out, Exit, Prev Menu, CS, VM Serv, Tr Serv, Subscriber
Serv, Dial by Name, Repeat Menu, Main Menu, Fax Tr, None (see "Keypad Assignment 0–9, *, #".)
Feature Guide References
2.3.15 Custom Service
Day Control
This service routes callers to different Custom Service based on the day of each week or holiday.
To Next Page
Loading...
