Panasonic KX-UT123 Quick Start Guide

Skip to content
Manuals+
User Manuals Simplified.
Home » Uncategorized » Setting a Static IP Address on a Panasonic Device
Setting a Static IP Address on a Panasonic Device
Note: This guide is only compatible with the Panasonic KT-UT123B phones and additional Panasonic KT-UTXXX
devices.
The first step when assigning a static IP address to anything is to gather the information specific for the network it will be
connecting to.
You will need the following information:
IP address the device will be assigned (ie. 192.168.X.X)
Subnet Mask (ie. 255.255.255.X)
Default Gateway/Routers IP address (ie. 192.168.X.X)
DNS Servers (Nextiva recommends using Google’s DNS: 8.8.8.8 & 4.2.2.2)
Once you have the necessary information, you will input it into the device. Unplug and plug the power to the
Panasonic phone. Before the boot-up process finishes, press the Setup button.
Once on the Setup menu, use the directional pad to highlight the Network Settings option. Press Enter on the screen or on
the center of the directional pad.

Panasonic KX-UT123 Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Volume control	Digital
Number of handles included	1 pc(s)
Voice codecs	G.711a, G.722, G.726, G.729A
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Display resolution	242 x 55 pixels
Lines quantity	- lines
Call log entries	60
Phonebook capacity	500 entries
Number of VoIP accounts	-
Supported network protocols	IPv4, DNS, HTTP, HTTPS, SNTP Client
Power consumption (typical)	2 W
Power consumption (PowerSave)	1.3 W
Operating temperature (T-T)	0 - 40 °C
Compliance industry standards	IEEE 802.1q, 802.3af

Weight and Dimensions

Depth	160 mm
Width	205 mm
Height	170 mm
Weight	870 g