Follow the same steps as entering the static IP address. Repeat this for the Default Gateway and DNS Servers. Once all
the static IP address information is entered, press Enter. Reboot the phone, and it will boot back up using the programmed
static IP address.
If you have any questions, contact our Support Team here or email us at support@nextiva.com.
Related Manuals
1. Setting a Static IP Address on the NETGEAR WNR3500L Before programming your NETGEAR router, you will need to
acquire...
2. Setting a Static IP for Poly SoundPoint IP Phones Note: This guide is only compatible with the Poly 4.0...
3. Setting Up a Panasonic KX-A406 Repeater The Panasonic KX-A406 is a small hardware add-on to the...
4. Setting Up a Panasonic KX-TGP 550 with Nextiva Setup & Installation Remove the phone from the box and...
To Next Page
Loading...
