Connection Method
1. Connect the device and the handset, the device and stand, one by one.
2. Connect the LAN cable.
※ Connect using the steps above if POE power supply support router is used. When using the AC
Adapter, always plug the cable first.
Fundamental Setting
1. From Setting, press the button below the LCD screen.
2. Using [▲] and [▼] silver buttons, go to Network Setting, select Decide. Go to Network and select
Decide. Then, go to Automatic Address Acquiring and select Decide.
3. Using [▲] and [▼] silver buttons, Select Decide in DNS.
4. Press Back to navigate to the previous screen.
Navigating to the Setting Screen
1. Press Setting.
2. Using the [▲] and [▼] , from Information, go to IP Address.
Copyright © cloudippbx.com
3
To Next Page
Loading...
