Panasonic KX-UTG200

Location of Controls
9
AHandset Hook
Keeps the handset stable when the unit is mounted on a wall.
BLCD (Liquid Crystal Display)
KX-UTG200 is equipped with a 3.5-inch color LCD and LCD backlight.
KX-UTG300 is equipped with a 5.0-inch color LCD touch screen and LCD
backlight.
CFlexible Buttons/Flexible Button Lamps (KX-UTG200 only)
Used to make or receive calls, or perform the feature that has been assigned
to the button. The exible button lamp shows the status of each exible
button.
DMessage/Ringer Lamp
When you receive a call, the lamp ashes red.
When someone has left you a message, the lamp stays on red.
ESoft Buttons (S1 to S4) (KX-UTG200 only)
S1 to S4 (located below the display) are used to select the item displayed on
the bottom line of the display.
FMESSAGE
Used to access your voice mailbox.
GVOLUME
Used to adjust the volume.
HFORWARD/DO NOT DISTURB
Used to set Call Forwarding or Do Not Disturb on your extension.
INavigator Key
Used to select desired items.
JENTER
Used to assign the selected item.
KHOME
Used to return the display to the home screen.
LSP-PHONE (Speakerphone)
Used for performing hands-free operations. When the SP-PHONE is used, its
lamp turns red.
MHEADSET
Used when using a headset. When the HEADSET is used, its lamp turns red.
NCONFERENCE
Used to establish a three-way conference.
OTRANSFER
Used to transfer a call to another party.
PMUTE
Used to mute the microphone/handset/headset during a conversation. When
the MUTE is used, its lamp turns red.