153
11. Using the Wi-Fi function
Connecting with a password further enhances security. You can scan a QR code or
manually enter a password to set up a connection.
Preparations: (On the camera)
∫ Using the QR code to set up a connection
A SSID and password
B QR code
• When the camera is ready to be connected to the smartphone,
the QR code, SSID and password are displayed.
• You can also display the information by pressing [Wi-Fi] on the
camera.
1 Start “ Image App ”.
2 Select [QR code].
• When the smartphone is connected to a wireless access point, it may take time to display
[QR code].
• (For iOS devices) A confirmation screen will be displayed. Select [OK] to proceed.
3 Use the “Image App” to scan the QR code displayed on the screen of the
camera.
• If you press [MENU/SET] on the camera, the QR code will be enlarged.
4 Install the profile.
• If a pass code is set on the smartphone, you need to enter it.
5 Press the home button to close the browser.
6 Turn on the Wi-Fi function in the setting menu.
7 On the Wi-Fi setting screen, select the SSID displayed on
the camera.
8 Start “ Image App ”.
• (For iOS devices) Steps 1 through 5 are not required from the second
time on.
Using a password to set up a connection
> [Setup] > [Wi-Fi] > [Wi-Fi Setup] > [Wi-Fi Password] > [ON]
On the camera
> [Setup] > [Wi-Fi] > [Wi-Fi Function] >
[New Connection] > [Remote Shooting &
View]
On your smartphone
For iOS devices only (iPhone/iPod touch/iPad)
MENU
',63&KDQJHPHWKRG
3OHDVHVFDQWKH45FRGHXVLQJಯ,PDJH$SSರ
RUHQWHUWKHSDVVZRUGLQWR:L)LVHWWLQJV
3OHDVHVHWRQ\RXUVPDUWSKRQH
66,'
3DVVZRUG
VVZRUG
MENU
To Next Page
Loading...
Need help?
General
