5. 4K Photo and Drive Settings
86
Select a Drive Mode
Applicable modes:
You can change what the camera will do when you press the shutter button.
1
Press 4 ().
2
Press 2/1 to select the drive mode, and
then press [MENU/SET].
∫ To cancel the drive mode
Select [ ] ([Single]) or [ ] in step
2.
• The self-timer can also be cancelled by turning off the camera. (When [Self Timer Auto Off]
(P136) is set to [ON])
1 [Single]
When the shutter button is pressed, only one picture is
recorded.
2 [Burst] (P87)
Recordings are made in succession while the shutter
button is pressed.
3 [4K PHOTO] (P76)
When the shutter button is pressed, a 4K photo is
recorded.
4 [Post Focus] (P83)
When the shutter button is pressed, Post Focus
recording is performed.
5 [Auto Bracket] (P89)
Each time the shutter button is pressed, recordings
are made with different exposure settings according to
the Exposure Compensation range.
6 [Self Timer] (P91)
When the shutter button is pressed, recording takes
place after the set time has elapsed.
To Next Page
Loading...
