Panasonic Lumix DC-FT7 - Selecting the desired focus area and saving a picture

85
5. 4K Photo and Drive Settings
1 Select an image with the [ ] icon on the playback
screen, and press 3.
2 Press 3/4/2/1 to select the focus area.
• If a picture that is in focus is not available for the selected
area, a red frame will be displayed. You cannot save a
picture in this case.
• You cannot select the edges of the screen.
• You can fine-adjust the focus by pressing 2/1 during
enlarged display.
3 Press [MENU/SET] to save the picture.
• The picture will be saved in JPEG format.
Selecting the desired focus area and saving a picture
Button operation Description of operation
3/4/2/1
Selects a focus area.
• It cannot be selected during enlarged display.
Enlarges the display.
Reduces the display (during enlarged display).
[Fn2]
In-focus portions are highlighted with colour. (Peaking)
• Switches in order of [OFF] > [ ] ([LOW]) > [ ]
([HIGH]).
[MENU/SET] Saves the picture.
• You cannot choose and save the picture from a TV screen even if the camera is connected to
a TV through an HDMI micro cable.
)Q
)Q