9. Using Menu Functions
226
Set whether to enable recording even when focus is not achieved with Auto Focus.
• Different settings can be applied to different Focus Mode settings ([AFS/AFF], [AFC]).
When AF Lock is ON (press the shutter button halfway with the focus mode set to [AFS] or
set AF Lock using [AF/AE LOCK]), you can make fine adjustments to the focus manually.
Sets the display method of MF Assist (enlarged screen).
• Available settings vary depending on the lens used.
When an interchangeable lens having a focus ring (H-ES12060/H-FS12060/H-HSA12035)
is used
When an interchangeable lens with no focus ring is used
Settings: [ON]/[OFF]
Sets whether MF Assist (enlarged screen) will appear in a windowed screen display or in a
full screen display.
[Focus/Release Priority]
[FOCUS] Disables recording when focus is not achieved.
[BALANCE]
Performs recording while controlling the balance between focusing and
shutter release timing.
[RELEASE] Enables recording even when focus is not achieved.
• In the following cases, [RELEASE] operates as [BALANCE].
– In Manual Focus
– When recording with [6K/4K Burst]
– When recording with the Post Focus
function
– When recording with the Self-timer
– When using [Time Lapse Shot]
– When using [Stop Motion Animation] (only
when [Auto Shooting] is set)
– When [Half Press Release] is set to [ON]
– When recording with the Touch Shutter
– When recording remotely with a smartphone
[AF+MF]
[MF Assist]
[]The screen is enlarged by operating the lens or by pressing [ ].
[]The screen is enlarged by operating the lens.
[] The screen is enlarged by pressing [ ].
[OFF] The screen is not be enlarged.
• MF Assist is not displayed in the following cases:
– When recording motion pictures
– When recording with [6K/4K Pre-Burst]
– When using the Digital Zoom
[MF Assist Display]
To Next Page
Loading...
Need help?
General
