12. Others
334
• It is only displayed on the monitor when the camera is connected to a PC or printer.
• Viewfinder of this unit adopts OLED. Screen burn-in may occur on the screen/viewfinder when
a same image is displayed for a long period of time, but it does not affect the recorded images.
• Being a characteristic of the viewfinder of this unit, this phenomenon is not a problem.
Recorded images are not affected.
• Is the card inserted?
• Is this a folder or picture which was processed in the PC?
If it is, it cannot be played back by this unit.
> It is recommended to use the software “PHOTOfunSTUDIO” (P311) to write pictures from
PC to card.
• Has [Playback Mode] been set for playback?
> Change to [Normal Play]. (P248)
• Motion pictures recorded with a different [System Frequency] setting cannot be played back.
(P240)
> Return the [System Frequency] setting to the one you used during the recording.
• When Red-Eye Removal ([ ] or [ ]) is performed, red parts may be corrected to black.
> We recommend recording images with Flash Mode set to [‰] or [Red-Eye Removal] set to
[OFF]. (P214)
Monitor and viewfinder do not switch when [LVF] is pressed.
Unevenly bright parts or irregular colours appear on the Viewfinder.
The colour tone of the viewfinder differs from the actual tone.
Playback
The picture is not played back.
There are no recorded pictures.
Cannot play back motion pictures.
Red part of the recorded image has changed colour to black.
To Next Page
Loading...
Need help?
General
