4. Focus, Brightness (Exposure) and Colour tone Settings
106
Applicable modes:
You can optimise the focus and brightness for the position you have touched.
1
Select the menu. (P51)
2
Touch the subject you want to optimise the
brightness for.
• AF area setting screen is displayed. (P104)
• The brightness optimisation position is displayed on the
centre of the AF area. The position follows the movement
of the AF area.
• [Metering Mode] is set to [ ], which is used exclusively for the Touch AE.
• Touching [Reset] returns the brightness optimisation position and the AF area to the
centre.
3
Touch [Set].
• The AF area with the same function as [Ø] is displayed on the touched position.
• Touching [ ] ([ ] when [Ø] is selected) will cancel the [AF+AE] setting.
Optimising the focus and brightness for a touched position
> [Custom] > [Touch Settings] > [Touch AF] > [AF+AE]
When the background has become too bright, etc., the
brightness contrast with the background can be
adjusted by compensating the exposure.
• When recording with the Touch Shutter, the focus and brightness are optimised for the
touched position before recording takes place.
• At the edge of the screen, the metering may be affected by the brightness around the touched
location.
Not available in these cases:
• [AF+AE], which optimises the focus and brightness, does not work in the following cases.
– When using the Digital Zoom
5HVHW
ュリヴヱハ
6HW
To Next Page
Loading...
Need help?
General
