2. Getting Started/Basic Operations
44
Rotating the control dial:
Selection of items or setting of values etc., is performed.
In these operating instructions, turning the control dial is indicated as follows.
Pressing the cursor button:
Selection of items or setting of values etc., is performed.
Pressing [MENU/SET]:
Confirmation of setting contents, etc., is performed.
• These operating instructions expresses the up, down, left, and
right of the cursor button as 3/4/2/1.
Control Dial
Cursor buttons/[MENU/SET] button
• By assigning [Cursor Button Lock] to a function button, you can disable the cursor buttons, the
[MENU/SET] button, and the control dial. (P55)
To Next Page
Loading...
