12. Others
302
Message Display
Confirmation messages or error messages will be displayed on the screen in some cases.
The major messages are described below as examples.
[Recording stopped due to overheating. Please wait for the camera to cool down.]/
[Temporarily disabled. Please wait for the camera to cool down.]
• The camera stops operating for self-protection in the manner described below when
overheated due to, for example, high ambient temperature or continuous 4K photo or motion
picture recording. Wait until the camera cools down.
– Continuous recording, motion picture recording, and the Wi-Fi connection will be
temporarily disabled.
– If you continue recording even when [ ] is flashing on the screen, a message will be
displayed and the camera will turn off automatically.
[Some pictures cannot be deleted]/[This picture cannot be deleted]
• This feature can only be used with pictures that comply with the DCF standard.
Perform formatting (P30) on this unit after saving necessary data on a PC, etc.
[Cannot be set on this picture]
• [Title Edit], [Text Stamp], [Print Set] , etc. cannot be set for pictures not based on the DCF
standard.
[Memory Card Error
Format this card?]
• It is a format that cannot be used with this unit.
– Insert a different card.
– Format the card again with the camera after saving necessary data on a PC etc. (P30)
Data will be deleted.
[The lens is not attached properly. Do not push lens release button while lens is
attached.]
• Detach the lens once, and then attach it again without pressing the lens release button. (P33)
Turn this unit on again, and if it is still displaying, contact the dealer.
[Lens attachment failed. Please make sure the lens is attached correctly.]
• Detach the lens from the camera body and gently wipe the contacts on the lens and the
camera body using a dry cotton swab.
Attach the lens, turn this unit on again, and if it is still displaying, contact the dealer.
To Next Page
Loading...
Need help?
General
