5. 4K Photo and Drive Settings
134
Select a Drive Mode
Applicable modes:
You can change what the camera will do when you press the shutter button.
1
Press 4 ().
2
Press 2/1 to select the drive mode, and then
press [MENU/SET].
A Drive mode
3
Focus on the subject and take a picture.
∫ To cancel the drive mode
Select [ ] ([Single]) or [ ] in step
2.
• You can also cancel the self-timer by turning off the camera. (When [Self Timer Auto Off]
(P214) is set to [ON])
1 [Single]
When the shutter button is pressed, only one picture is
recorded.
2 [Burst] (P135)
Recordings are made in succession while the shutter
button is pressed.
3 [4K PHOTO] (P119)
When the shutter button is pressed, a 4K photo is
recorded.
4 [Post Focus] (P128)
When the shutter button is pressed, Post Focus
recording is performed.
5 [Self Timer] (P137)
When the shutter button is pressed, recording takes
place after the set time has elapsed.
H
To Next Page
Loading...
