213
9. Using Menu Functions
[TV Connection]
[HDMI Mode (Play)]:
Sets the image output format.
[AUTO]:
The output resolution is automatically set based on
the information from the connected TV.
[4K]:
The progressive method with 2160 available scan
lines and an output resolution of 3840k2160 are
used for output.
[1080p]:
The progressive method with 1080 available scan
lines is used for output.
[1080i]:
The interlace method with 1080 available scan lines
is used for output.
[720p]:
The progressive method with 720 available scan
lines is used for output.
[576p]:
The progressive method with 576 available scan
lines is used for output.
Depending on the connected TV, 480 available scan
lines may be used for output.
• If no image appears on the TV with [AUTO], switch the
setting to a constant setting other than [AUTO] to set a
format supported by your TV. (Read the operating
instructions for the TV.)
P279
> [Setup]
To Next Page
Loading...
