309
12. Others
• If no operations are performed during the set time period, [Auto Monitor Off] (P212) is activated,
and the Monitor turns off.
• This occurs due to the aperture of the lens changing when the shutter button is pressed
halfway, or when the brightness of the subject changes. This is not a malfunction.
• This is not a malfunction.
These pixels do not affect the recorded pictures.
• In dark places, noise may appear to maintain the brightness of the monitor.
• Is the card inserted?
• Is this a folder or picture which was processed in the PC?
If it is, it cannot be played back by this unit.
> It is recommended to use the software “PHOTOfunSTUDIO” (P283) to write pictures from
PC to card.
• Has [Playback Mode] been set for playback?
> Change to [Normal Play]. (P220)
• When Red-Eye Removal ([ ] or [ ]) is performed, red parts may be corrected to black.
> It is recommended to take a pictures with the flash closed, Flash Mode set to [‰], or
[Red-Eye Removal] set to [OFF]. (P190)
Monitor
The Monitor turns off although the camera is turned on.
It may flicker for an instant or the brightness of the screen may change
significantly for an instant.
Black, white, red, blue and green dots appear on the Monitor.
Noise appears on the monitor.
Playback
The picture is not played back.
There are no recorded pictures.
Red part of the recorded image has changed colour to black.
To Next Page
Loading...
