Name: Panasonic Lumix DC-TZ95
Brand: Panasonic
Rating: 4 (1 reviews)

To Next Page

To Previous Page

302

Others

Q&A Troubleshooting

■

TV, computer, printer

No image appears on TV. Image blurred or not coloured.

• Not connected correctly (→275).

• The television has not been switched to auxiliary input.

VIERA Link (HDMI) is not working.

• Is the camera’s [VIERA Link] setting set to [ON]? (→206)

→ Check the VIERA Link (HDMI) settings on the device you are connecting to.

→ Turn the camera off and on again.

Cannot communicate with the computer.

• Set [USB Mode] to [PC(Storage)] (→205, 280).

• Turn the camera off and then on again.

Computer does not recognise card. (When using an SDXC Memory Card)

• Check whether your computer is compatible with SDXC Memory Cards.

• A message prompting you to format the card may appear when you connect it. Do not format the

card.

• If the [Access] indicator on the screen does not go off, turn the camera off before disconnecting the

USB connection cable (supplied).

Cannot print when connecting to printer.

• Printer not compatible with PictBridge.

• Set [USB Mode] to [PictBridge(PTP)] (→205, 283).

The edges of pictures are cut off when printing.

• Release any trimming or edgeless printing settings on printer before printing.

• The aspect ratio of pictures is different from that of paper used for printing.

→ If printing in shop, check if 16:9 sizes can be printed.

Panasonic Lumix DC-TZ95 Specifications

General

Panasonic Lumix DC-TZ95 User Manual

Questions and Answers: