Panasonic Lumix DC-TZ95 User Manual

303
Others
Q&A Troubleshooting
■
Others
The lens makes a clicking noise.
• When the camera is turned on or off, the lens is moved, or an aperture operation is performed,
such a noise may be heard. This is not a malfunction.
• When the brightness changes after a zooming operation or moving the camera, the lens may make
a noise while adjusting the aperture. This is not a malfunction.
Zooming stops instantaneously.
• When using the Extra optical zoom, the zooming action will stop temporarily. This is not a
malfunction.
Red lamp illuminated when pressing shutter button halfway in dark locations.
• [AF Assist Lamp] is set to [ON] (→188).
Camera is hot.
• Camera may become a little warm during use, but this does not affect performance or quality.
Clock is incorrect.
• If you do not use the camera for a long time, the clock may be reset.
→ Reset the clock (→30).
When using zoom, picture becomes slightly warped and the edges of the subject become
coloured.
• Pictures may be slightly warped or coloured around the edges, depending on the zoom ratio, but
this is not a fault.

Panasonic Lumix DC-TZ95 Specifications

General

Effective Pixels	20.3 megapixels
Optical Zoom	30x
Lens	LEICA DC VARIO-ELMAR
LCD Screen Resolution	1, 040, 000 dots
Connectivity	Wi-Fi, Bluetooth
Dimensions	112.0 x 68.8 x 41.6 mm
Digital Zoom	4x
Touch Screen	Yes
Built-in Flash	Yes
Sensor Type	MOS
Focal Length	4.3 - 129mm (24 - 720mm in 35mm equivalent)
Maximum Aperture	F3.3 - F6.4
ISO Sensitivity	80 / 100 / 200 / 400 / 800 / 1600 / 3200 / 6400
Image Stabilization	5-Axis HYBRID O.I.S.+
Display	3.0-inch TFT Screen LCD
Viewfinder	0.21" LVF (Live View Finder)
Video Recording	4K video at 30p
Battery	Lithium-ion (7.2V, 1025mAh)