- 12 -
Inserting and removing the card (optional)/
the battery
Turn off the power and slide
the card/battery door out ( )
before opening the door ( ) as
illustrated
Insert the battery and card,
making sure that their
orientation is correct
• Battery: Insert all the way firmly until
a locking sound is heard, and
check that the lever is hooked
over the battery.
• Card: Insert all the way firmly until it
clicks.
Card
(check orientation:
terminals face LCD)
Charged battery (check orientation)
Do not touch the terminal
Close the card/battery door and slide the door in until you
hear a locking sound
To Next Page
Loading...
Need help?
General
