- 48 -
Taking pictures with Exposure Compensation
Recording mode:
Corrects exposure when adequate exposure cannot be obtained (if difference between
brightness of object and background, etc.).
Press to display [Exposure]
Use cursor button to select a value and press [MENU/SET]
No compensation: ±0
• If the picture is too dark, adjust the exposure to the “+”
direction.
• If the picture is too bright, adjust the exposure to the “-”
direction.
• After exposure adjustment, the adjustment value (
for example) is displayed in the bottom-left corner of the
screen.
• The Exposure Compensation value you set is retained
even after the camera is turned off.
●
Depending on the brightness, this may not be possible in some cases.
To Next Page
Loading...
Need help?
General
