- 38 -
Using the [Setup] menu
Item Settings, notes
[Output]
Adjust the settings used
when the camera is
connected to a TV, etc.
via the AV cable.
(Playback mode only.)
[Video Out]
[NTSC] / [PAL]
[TV Aspect]
/
[Rotate Disp.]
Automatically rotate
portrait still pictures.
: Rotate and display pictures displayed on a TV
screen as well as those displayed on the LCD
monitor of the camera in portrait orientation.
: Rotate and display only pictures displayed on a TV
screen in portrait orientation.
[OFF]
• [Rotate Disp.] cannot be used with motion pictures.
• Still pictures taken with the lens surface facing up or
down, or still pictures taken on other cameras may not
rotate.
• Pictures cannot be rotated during Multi Playback.
• Will only be displayed rotated on computer if in Exif-
compatible (→26) environment (OS, software).
[Version Disp.]
Check the version of the
camera firmware.
Current version is displayed.
• For details about the setting procedure in the [Setup] menu (→33)
To Next Page
Loading...
Need help?
General
