- 25 -
Taking motion pictures [Motion Picture] Mode
Recording mode:
●
Depending on the type of card used, a card-access display may appear for a while after
motion picture recording. This is not a fault.
●
In [AF Mode], (23-area-focusing) is fixed.
●
In [Stabilizer], [ON] is fixed.
●
When there is no space left to store the motion picture, recording automatically ends.
Additionally, recording in progress may be stopped, depending on the card used.
Display the screen for recording
mode selection
Select [Motion Picture] Mode
Start recording
Press halfway
(adjust the focus)
Press fully
(start recording)
• Immediately release the shutter button after
pressing it all the way.
• The focus and zoom will remain as they
were at the beginning of recording.
End recording
Press fully
Remaining recording time (approx.)
Elapsed recording time
Microphone
(Do not block the microphone
with your fingers)
To Next Page
Loading...
Need help?
General
