- 97 -
Q&A Troubleshooting
Others
Menu not displayed in desired language.
●
Change [Language] setting (→39).
Camera rattles if shaken.
●
This sound is made by the lens movement and is not a fault.
Red lamp illuminated when pressing shutter button halfway in dark locations.
●
[AF Assist Lamp] is set to [ON] (→62).
AF Assist Lamp is not illuminated.
●
[AF Assist Lamp] is set to [OFF].
●
Not illuminated in bright locations.
Camera is hot.
●
Camera may become a little warm during use, but this does not affect performance or quality.
Lens makes a clicking noise.
●
When brightness changes, the lens may make a clicking noise and the monitor brightness may also
change, but this is due to aperture settings being made.
(Does not affect recording.)
Clock is incorrect.
●
Camera has been left for a long period.
→ Reset the clock (→16).
When using zoom, picture becomes slightly warped and the edges of the subject
become coloured.
●
Pictures may be slightly warped or coloured around the edges, depending on the zoom ratio, but
this is not a fault.
File numbers are not recorded in sequence.
●
File numbers are reset when new folders are created (→83).
File numbers have jumped backwards.
●
Battery was removed/inserted with power on.
(Numbers may jump backwards if folder/file numbers are not correctly recorded.)
When the camera is left alone, the slide show is suddenly displayed.
●
This is the [Auto Demo] to introduce the features of the camera.
To Next Page
Loading...
Need help?
General
