Advanced (Recording pictures)
55
VQT1B86
Displaying the Time at
the Travel Destination
(World Time)
If you set your home area and the travel
destination area when traveling abroad
etc., the local time at the travel destination
area can be displayed on the screen and
recorded on the pictures taken.
• Select [CLOCK SET] to set the current
date and time in advance. (P14)
1 Press [MENU/SET] and then
press 2.
2 Press 4 to select the [SETUP]
menu icon [ ] and then press 1
.
3 Press 3/4 to select
[WORLD TIME] and then press 1.
• If you are setting the world time for the
first time, the message [PLEASE SET
THE HOME AREA] appears. If this
message appears, press [MENU/SET]
and then set home area from the
screen shown in step 2 in “Setting the
home area [HOME]”.
∫ Setting the home area [HOME]
(Perform steps
1, 2 and 3.)
1 Press 4 to select [HOME] and then
press [MENU/SET] to set.
2 Press 2/1 to select your home area
and then press [MENU/SET] to set.
• The current time is displayed on the top
left of the screen and the time
difference from GMT “Greenwich Mean
Time” is displayed on the bottom left of
the screen.
• If daylight saving time [ ] is used at
the home area, press 3. Press 3
again to return to the original time.
• The daylight saving time setting for the
home area does not advance the
current time. Advance the clock setting
by one hour. (P14)
SETUP
EXIT
MENU
SELECT
OFF
TRAVEL DATE
0
n
MONITOR
GUIDE LINE
CLOCK SET
1
/
4
WORLD TIME
WORLD TIME
SET
CANCEL
SELECT
MENU
DESTINATION
HOME
10:00 DEC. 1.2007
/SET
MENU
10:00
MENU
GMT -5:00
SELECT SET
CANCEL
Toronto
New York
Miami
Lima
/SET
MENU
To Next Page
Loading...
Need help?
General
Weight and Dimensions
