Advanced (Recording pictures)
63
VQT1B86
∫ About [ ] or [ ]
• You can focus on the subject more quickly
than other AF modes.
• The picture may stop moving for a
moment before being brought into focus
when you press the shutter button
halfway. This is not a malfunction.
• The AF area displayed is bigger than
usual when taking pictures in dark places
or when using the digital zoom. The AF
area displayed on the center of the screen
may also be bigger than usual when
taking pictures in underwater mode.
• The camera is focusing on all the AF
areas when multiple AF areas (max.
5 areas) light at the same time.
The focus position is not predetermined. It
is set to a position automatically
determined by the camera at the time of
focusing. If you want to determine the
focus position to take pictures, switch the
AF mode to [ ], [ ] or [ ].
• If the AF mode is set to [ ] or [ ],
the AF area is not displayed until the
picture is brought into focus.
• Switch the AF mode to [ ] or [ ] if it
is difficult to focus using [ ].
• The AF mode cannot be set in simple
mode [ ], [SELF PORTRAIT] or
[FIREWORKS] in scene mode.
Press [ ] to display the [REC] mode
menu and select the item to set. (P57)
∫ About demonstration of jitter/
movement detection screen
Press 1 to display [JITTER, SUBJ. MOVE
DEMO] when the [STABILIZER] screen is
displayed. (Pictures cannot be recorded
when the [JITTER, SUBJ. MOVE DEMO]
screen appears.)
Press 1 again to finish this mode.
A: Jitter detection demonstration
B: Movement detection demonstration
• The camera automatically detects the
jitter and the movement of the subject and
displays these on the indicator.
• We recommend using a bright subject
with high contrast for the subject
movement demonstration.
• The jitter/movement detection
demonstration screen is an approximation.
• The camera also detects the movement of
the subject when automatically setting the
1/60F5.6
[STABILIZER]
Detecting jitter and compensating
for it
[MODE1]
()
The stabilizer operates
continuously and can assist
during photo composition.
[MODE2]
()
The jitter is compensated for
when the shutter button is
pressed. There is a greater
stabilizing effect.
[OFF]
()
When the stabilizer is not
desired.
/SET
MENU
JITTER, SUBJ. MOVE DEMO.
EXIT
CANNOT BE DISPLAYED
IN REC MODE
To Next Page
Loading...
Need help?
General
Weight and Dimensions
